Remove A Steering Column From A Ford Explorer
Se Aplica A: FORD EXPLORER (2003)
Herramientas Recomendadas
-
Destornillador plano
-
Herramienta de recorte de plástico
-
Vaso de 13 mm
-
Llave
-
Destornillador de estrella
-
Destornillador de bolsillo
-
Carraca
-
Enchufe de 8 mm
Instrucciones
-
1
Remove two 7mm bolts attaching knee bolster and remove
-
2
Remove 8mm bolts attaching the support/brace and remove
-
3
Remove Phillips screws on either side of lower shroud under steering wheel
-
4
Remove Phillips screw holding upper shroud
-
5
Unbolt fasteners connecting the wiring harness to the steering column
-
6
Disconnect electrical connectors attaching wires to steering column
-
7
Release the shifter cable from the arm using flat tip screwdriver
-
8
Remove cable from shifter mechanism using pocket screwdriver
-
9
Slide shifter cable off of bracket
-
10
Remove fastener from bottom of coupler using 13mm wrench
-
11
Remove three of four remaining 13mm fasteners from column
-
12
Brace the column and remove final 13mm fastener
-
13
Lower steering column off of studs and work it out of vehicle