HOW TO REMOVE A FUEL PUMP FROM A TOYOTA CAMRY

Se Aplica A: TOYOTA CAMRY (2000)


2000 Toyota Camry

Punta De Tracción: There may be fuel in the fuel line. This line may be pressurized. To remove pressure, remove the fuel pump fuse or relay and turn the engine over a few times until it no longer starts. You should then be able to remove the fuel line without any fuel leakage.

Herramientas Recomendadas

  • Enchufe de 8 mm Enchufe de 8 mm
  • Carraca Carraca
  • Extensiones de carraca Extensiones de carraca

Instrucciones

  • 1

    Release the latches and remove the rear seat from the vehicle

  • 2

    Pull back carpet to expose the fuel pump panel

  • 3

    Pry up the metal access cover

  • 4

    Press in on the latch assembly and remove

  • 5

    Remove the 7mm fasteners holding the protective plate in place

  • 6

    Follow the pull tip instructions to insure there is no pressure in the fuel line

  • 7

    Once pressure is removed from line, disconnect the fuel line from the pump

  • 8

    Remove six remaining 7mm bolts around the perimeter of the fuel pump

  • 9

    Grab ahold of the pump and remove from the opening

¿Eres Nuevo En Pull-A-Part? Aprenda El Proceso

Buscar En Nuestro Inventario

Encuéntralo En Tu Pull-A-Part Más Cercano.

O

Ver Precios De Piezas

Conozca El Coste Antes De Ir A La Tienda.

Buscar Vídeos De Extracción De Piezas

¿No ves tu marca o modelo?
Solicitar Un Vídeo

  1. U-Pull-&-Pay >
  2. Videoteca >
  3. Guías de extracción de piezas >
  4. How To Remove a Fuel Pump From a Toyota Camry