HOW TO REMOVE A RADIATOR FAN FROM A VOLKSWAGEN

Se Aplica A: VW GOLF (1999-2006) GOLF GTI (1999-2005) NEW BEETLE (1998-2005) This guide is for 1999-2006 VW Golf, 1999-2005 VW Golf GTI, and 1998-2005 VW Beetle models


Check out our helpful video detailing the instructions for how to remove a Volkswagen radiator fan. We have also listed out step-by-step instructions as part of our Volkswagen radiator fan removal guide. For your convenience, our step-by-step walkthrough for how to remove a VW radiator fan is also available for you to print.

This guide is for 1999-2006 VW Golf, 1999-2005 VW Golf GTI, and 1998-2005 VW Beetle models

Punta De Tracción: Following Engine types may have a similar removal process: 1.8t, Diesel, VR6

Tiempo Estimado De Extracción: 15-30 Minutes

Herramientas Recomendadas

  • Destornillador de estrella Destornillador de estrella
  • Punta Torx T-30 Punta Torx T-30
  • Llave de vaso de 10 mm Llave de vaso de 10 mm
  • Carraca Carraca
  • Destornillador plano Destornillador plano
  • Imán Imán

Instrucciones

  • 1

    Start by removing the two air duct pieces by unscrewing the Phillips screws on the top

  • 2

    Take off the three 10mm nuts that hold the fan to the bracket

  • 3

    Now that the fan is loose, you only need to take out the top two T30 screws

  • 4

    Undo the wire loom from its retainer

  • 5

    Pull the connector out of the retainer for the connector and then disconnect the connector

  • 6

    Pull the retaining bracket for the fan back and work the fan out

Transcripción Del Vídeo

Hey everybody, Charles from humblemechanic.com, back with another DIY and drive tutorial with pull-apart used auto parts. Today, I'm going to be showing you how to remove an electric fan from a Volkswagen. The tools that we're going to need for this job is going to be a Phillips head screwdriver, a T30, a 10-millimeter socket, a ratchet, and a magnet is really helpful for this job. We're going to start by removing the two air ducting pieces. Now, one was removed for us, so we only need to remove this one. Next, we're going to take off the three 10-millimeter nuts that holds the fan to the bracket, and finally, the last Now that our fan is loose, we need to take out only the top two T30's. Now we need to undo the wire loom from its retainer, so we're going to pull that out. We're going to pull the connector out of the retainer for the connector, and then disconnect the connector. And finally, we just go ahead, pull the retaining bracket for the fan back, and work the fan out.
All right, guys, this is Charles from humblemechanic.com. Thanks for watching. And I will see you next time.

¿Eres Nuevo En Pull-A-Part? Aprenda El Proceso

Buscar En Nuestro Inventario

Encuéntralo En Tu Pull-A-Part Más Cercano.

O

Ver Precios De Piezas

Conozca El Coste Antes De Ir A La Tienda.

Buscar Vídeos De Extracción De Piezas

¿No ves tu marca o modelo?
Solicitar Un Vídeo

  1. U-Pull-&-Pay >
  2. Videoteca >
  3. Guías de extracción de piezas >
  4. How to Pull a VW Radiator Fan: VW Series